美國Holaday HI3804 RF工頻磁場測試儀

美國Holaday HI 3804 RF工頻磁場測試儀
主要功能特點介紹：
HI-3804工業電磁場測試儀的各向同性探針能夠測量感應電場和磁場。
主要特點：
數據資料記錄（112點）
電和磁場力量測量
場強長條圖
便宜的EMF偵查
在機上數據資料記錄和回顧
在范圍（超載）警告警報
Planewave等效功率密度讀出選擇
美國Holaday HI 3804 RF工頻磁場測試儀特點描述：
HI-3804是一種便宜的EMF偵查和測量解答為應用在10 - 42兆赫主義頻帶。設備在高領域環境里簡化要求的測試方法確定電磁場放射服從例如RF熱化和焊接。特點包括在機上數據資料記錄和回顧、電和磁場力量測量、線性和功率密度部件顯示和.05 - 50 mW/cm2的一個力學范圍。
標準配置：
便攜包
用戶手冊
電子規格
物理規格
儀器規格：
電池：9 V堿性電池（2）
顯示單位：V/m， A/m， mWcm2 
環境： 0 - 95%濕度，不能結露、10 - 40°C。

2數顯推拉力計

FGC-100HB測力儀模式

標準型

FGC-0.2

FGC-0.5

FGC-1B

FGC-2B

FGC-5B

經濟型

—

—

—

FGN-2B

FGN-5B

定額負荷量

±1.961N

±4.903N

±9.81N

±19.61N

±49.03N

±200.0gf

±500.0gf

±1000gf

±2.000kgf

±5.000kgf

±8.00ozf

±16.00ozf

±2.000lbf

±5.000lbf

±10.00lbf

測量范圍

±2.00N

±5.000N

±10.00N

±20.00N

±50.00N

±200.0gf

±500.0gf

±1000gf

±2.000kgf

±5.000kgf

±8.00ozf

±16.00ozf

±2.00lbf

±5.00lbf

±10.00lbf

分辨率

0.001N/0.1gf/0.01ozf

0.01N/1gf/0.001lbf

0.1N/0.001kgf/0.01lbf

測量單位

（易于轉換顯示功能單位）

測量方法

正常測定和峰值測定

更新時間

0.3秒

測量次數

35次/秒

精度

±0.2%R.C.+1/2位（23C）

溫度效應

變化范圍：零點偏移/因牽引而消除

顯示

4位12mm高LCD，1個張力顯示用（可選轉換顯示）其他顯示器：1.“LOWBAT" 2.“BAT"（電池正充電）3.“OVR"（超載）4.“PEAK"（峰值模式)

超載容許

R.C. 200%

Teacking功能

開/關可供選擇

輸出信號

RS-232C

有(通過通信軟件,可以與PC連接.與PC的連接線為另賣品)連續送信zui大為100次/秒

模擬

±1V（±zui大值載入）12位D/A轉換方法，輸出間隔140次/秒

超載

開放式連接器輸出（DC30V 5mA zui大值）

電源

鎳鎘電池和AC適配器（DC9V 200mA)

電源自動關閉功能

待機10分鐘，由AC供電時能夠連續使用

操作溫度

0~40℃

尺寸

寬75*高38*長147mm

重量

約450g

附件(包括在內)

扁平頂蓋,掛鉤,鋼鑿,三角帶,椎體,擴展桿,便攜式提箱，直流電源適配器,RS-232C線

55075010數顯扭矩扳手

左右手適用，精細棘輪頭。Nm，ft.ib和In.Ib三刻度顯示，LED指示燈指示功能。兩種工作模式。 電腦及打印機連口。+/-2%高精確度，有獨立的檢驗證書和序列號。

ACX-500數字航天電纜張力計

ACX-100數字航空用鋼絲繩張力計

*Calibrations for 3/16", 7/32" and for metric sized cables can be added to the cable selection menu upon request, however cables with diameters larger than 5/32" will only indicate up to approximay 90% of maximum tension range. For example, an instrument scaled for a maximum tension range of 250 lbs will display readings up to approximay 225 lbs on 7/32" or 3/16" diameter cables.

Note: Add option-designator letter to the end of the Model Number. (For example, a Model ACX-250-E denotes a standard ACX-250 with the optional RS-232, serial output function included.)

·  Instruments can be configured with any or all of these options.

ACX-100數字航空用鋼絲繩張力計

*Calibrations for 3/16", 7/32" and for metric sized cables can be added to the cable selection menu upon request, however cables with diameters larger than 5/32" will only indicate up to approximay 90% of maximum tension range. For example, an instrument scaled for a maximum tension range of 250 lbs will display readings up to approximay 225 lbs on 7/32" or 3/16" diameter cables.

Note: Add option-designator letter to the end of the Model Number. (For example, a Model ACX-250-E denotes a standard ACX-250 with the optional RS-232, serial output function included.)

·  Instruments can be configured with any or all of these options.

STX-2000張力計

STX-1000張力計

*The STXM-2000 includes all calibrations for POLY and PET strapping with thicknesses from .020" - .055", and STEEL strapping with thicknesses between .017" - .044".

·  Data Logging has adjustable duration and sampling rates.

·  Large, easy to read backlit, graphic display with adjustable backlighting and contrast.

·  Select tension values to display in lbs, Kg, or Newtons.

·  Select strap material and size from menu. Instrument automatically adjusts calibration for your specific setting.

·  Up to 10 calibrations can be programmed into instrument. (All calibrations password protected.)

·  Adjustable LCD refresh rates allow for stable digital readings.

·  All models typically available from stock.

·  All models factory-calibrated and ready for use.

·  Calibration values traceable to National Standards. Calibration certificate included.

·  Note: Add option-designator letter to the end of the Model Number. (For example, a Model STX-1000-A denotes a standard STX-1000 with the optional Analog Output function included.)

ACM-600張力計

CX-2000張力計

CX-2000張力計

TR-25機械張力計

WC系列張力計

The Sheet Tension Meter, Model WC-series, measures the tension of any width material which is long, flat and thin, such as: paper, film, plastic sheets, cloth, web, loom beams, metal foils or winding electrical condensers.

The Sheet Tension Meter, Model WC-series measures tension in flexible sheets or webs which are typically 8" or wider. The instrument is inserted from the edge and measures per inch of web width up to 4" inside your material, so the waviness at the edges is avoided. Hand crafted from solid anodized aluminum, ranges are available to measure tension up to 100 pli or 50 kg/pli.

Ensure consistency in your manufacturing process.

Direct Reading or Comparator Dials Available.

Adaptable for materials as thin as paper to sheets as stiff as foils.

Engagement and disengagement onto materials is quick, safe and easy.

Readings are obtained regardless of meter position.

Weighs only 3 lb. LX-250張力計

For use on materials with critical tension ranges up to 500 lbs.

Large, easy to read, graphic display with adjustable backlighting and contrast.

Select tension values to indicate in Lbs, Kg or Newtons.

Display shows Tension, Battery Charge level and Material selected.

Push a button to activate the Memory Function to store and display up to five separate tension readings plus the average value (AVG) of these stored readings.

Accuracy is +/- 2% full-scale for all menu-selectable calibrations. Accuracy for custom calibrations is material specific. ? Up to 10 calibrations can be programmed into instrument. (All calibrations are password protected to provide due diligence against unauthorized changes).

Adjustable LCD refresh rates allow for stable digital readings.

All models typically available from stock.

All models factory calibrated and ready for use.

All calibration values traceable to National Standards.

Calibration certificate included.

AVAILABLE OPTIONS FOR ALL INSTRUMENTS

Note:  Add option designator to the end of the part number.  (i.e.: a Model LX-250-E denotes a standard, LX-250 with the optional RS-232, serial output function installed).

-A      Analog Output option.  0-5 VDC or 4-20mA with Software-definable ending sequences.  Provided with 10’ of cable.  Data outputted at 40 Hz.

-E      RS-233 Serial Output option.  Provided with 10’ cable to Interface with your receiving device.  Select data sampling rate from 1, 2 or 5 Hz.

Input Real-Time Serial Data into any Windows® application using the optional software WinWedge Pro® for Windows, or configure your Window’s® operating system to capture the data via Hyper Terminal®.

SPECIFICATIONS:

Approximate weight is 1-1/2 lb  (Weight varies depending upon instrument configuration).

Re-chargeable NIMH battery with power supply provided.  Recommended temperature range for instruments is 35 - 115° F.   Approximay 6 hours of operation per battery charge depending upon backlighting intensity.

Power Supply operates with input voltages from 100 – 240V and includes several, interchangeable “blades" allowing use with European, US, Australian and other plug configurations.

Automatic shutoff after 10 minutes of non-use.

Instruments may be operated continuously while connected to power supply.

Durable, lightweight carrying case with protective foam inserts.

CE Certification complying with heavy, industrial immunity standards.

BTM系列張力計pical Weight: 2 lb, 14 oz

Easy To Read Dial in lg or kg

Right- or Left-Hand Operation

Durable Solid Anodized Aluminum Construction

Sturdy Handle For Ease of Use on Moving Materials

Provided with Heavy Duty Polyethylene Carrying Case

Stainless Steel, Anodized Aluminum, P.T.F.E. or Delrin Contact Elements Available

The Band Tension Meter is used to measure the tension in tapes or many wires/yarns in parallel. Ranges are available up to 500 lb or 250 kg. This instrument is ideal for use with bands, flat cable, and flat conductors as well as round wire/cable configurations. The contact rollers can be made up to 3" long, plus the instrument can be outfitted with a variety of small grooved pulleys for round wire and cable applications. Please Tensitron if you would like assistance in selecting the appropriate meter for your specific application.

LXR-500張力計For use on materials with critical tension ranges up to 500 lbs.

Large, easy to read, graphic display with adjustable backlighting and contrast.

Select tension values to indicate in Lbs, Kg or Newtons.

Display shows Tension, Battery Charge level and Material selected.

Push a button to activate the Memory Function to store and display up to five separate tension readings plus the average value (AVG) of these stored readings.

Accuracy is +/- 2% full-scale for all menu-selectable calibrations. Accuracy for custom calibrations is material specific. ? Up to 10 calibrations can be programmed into instrument. (All calibrations are password protected to provide due diligence against unauthorized changes).

Adjustable LCD refresh rates allow for stable digital readings.

All models typically available from stock.

All models factory calibrated and ready for use.

All calibration values traceable to National Standards.

Calibration certificate included.

AVAILABLE OPTIONS FOR ALL INSTRUMENTS

Note:  Add option designator to the end of the part number.  (i.e.: a Model LX-250-E denotes a standard, LX-250 with the optional RS-232, serial output function installed).

-A      Analog Output option.  0-5 VDC or 4-20mA with Software-definable ending sequences.  Provided with 10’ of cable.  Data outputted at 40 Hz.

-E      RS-233 Serial Output option.  Provided with 10’ cable to Interface with your receiving device.  Select data sampling rate from 1, 2 or 5 Hz.

Input Real-Time Serial Data into any Windows® application using the optional software WinWedge Pro® for Windows, or configure your Window’s® operating system to capture the data via Hyper Terminal®.

SPECIFICATIONS:

Approximate weight is 1-1/2 lb  (Weight varies depending upon instrument configuration).

Re-chargeable NIMH battery with power supply provided.  Recommended temperature range for instruments is 35 - 115° F.   Approximay 6 hours of operation per battery charge depending upon backlighting intensity.

Power Supply operates with input voltages from 100 – 240V and includes several, interchangeable “blades" allowing use with European, US, Australian and other plug configurations.

Automatic shutoff after 10 minutes of non-use.

Instruments may be operated continuously while connected to power supply.

Durable, lightweight carrying case with protective foam inserts.

CE Certification complying with heavy, industrial immunity standards.

ATLAS系列高載荷測試機ATLAS系列高載荷測試機ATLAS5到50KN測試機用于測試力大于5KN的試驗中。強力發動機和雙柱結構的結合使該機與STENTORS有相似的功能?；幸粋€(gè)適于安裝夾具的固定孔。傳感器固定于橫梁上，橫梁由雙螺桿系統移動，并由雙立柱導軌控制升降。ATLAS系列的控制臺和STENOR采用相同的控制系統。

ANDILOG傳感器

EASY帶TM傳感器數顯扭力計同樣使用了CENTOR技術。CENTOR W EASY數顯扭力計采用一個超大的顯示屏可以顯示精確測量結果。它可以同時顯示當前值、峰值。進度條顯示了測量是否接近zui大量程。如有需要背景光可以讓讀數更加容易。

      它*的測量設備可以使取樣頻率在1000赫茲，分辨率在1/10000FS，誤差小于0.5%（滿量程）。

      同時還可拓展其它多種功能來完善該儀器。

      設點功能可以設置“合格，不合格"，同時信號會(huì )在顯示屏上表示出來，通過RS232輸出端可以連接電腦。

      數字輸出可以用Mitutoyo打印機進行數據打印。

技術參數

·順、逆時針雙向轉動

·精度：0.5%（滿量程）

·分辨率：1/1000FS

·峰值鎖定功能（雙向）

·當前值和峰值同時顯示

·進度條顯示功能

·三種單位：牛米、千克厘米、毫牛米

·取樣頻率：1000赫茲

·可以用腳踏開關

·校準功能

·.5-15分鐘自動關機（可調）-

·可編程設置功能

·.雙口RS232輸出：隨意傳輸zui大、zui小或當前值

·數字輸出

·連續工作8小時不用充電

·快速充電

·翻轉顯示功能

·背景光顯示

·可充電電池

·低電提示

·配置記憶功能

·金屬外殼并且內部有彈性保護膜

·背后有用于固定在支架上的螺孔

·校準證書

·.裝有適配器和附件的便攜工具箱

Star帶TW傳感器數顯扭力計技術參數：

◆　順、逆時針測試

◆　精度：0.5%

◆　分辨率:1/10000FS

◆　雙向峰值保持

◆　當前值和峰值同時顯示

◆　扭矩/時間曲線圖

◆　顯示曲線圖上的特殊點:zui大值、任一時間值、拐點、導數值、*峰值、開始和結束值、平均值等

◆　上一曲線圖的保存

◆　進度條顯示

◆　三個單位：Nm，Kg.cm，cm，mNm

◆　取樣頻率：1000赫茲

◆　可以用腳踏開關

◆　校準功能

◆　5~15分鐘自動關機（可調）

◆　可編程設置功能

◆　雙口RS232輸出：隨意傳輸zui大、zui小或當前值

◆　數字量輸出

◆　曲線圖輸出

◆　每秒50個值的傳輸速度

◆　當前值的設定保護功能

◆　自動確認傳感器

◆　可翻轉顯示功能

◆　連續工作8小時不用充電

◆　快速充電

◆　可逆測量

◆　背景光顯示

◆　可充電電池

◆　低電提示

◆　配置記憶功能

◆　金屬外殼并且內部有彈性保護膜

◆　背后有用于固定在支架上的螺孔

◆　校準證書

◆　裝有適配器和附件的便攜工具箱

UTCM 20L00050機械扭力計5.提供標準金屬儀表箱

UTCM 20L00050機械扭力計機械扭力計這是一種基本的扭力計，適合于試驗室或工廠種的多種低量程測量。它體積小，在測量調整旋鈕或塑料張力有不可替代的作用。

技 術 參 數

1.可進順逆時針扭力測試

2.峰值點自動記錄

3.操作簡單,價格低廉

4.精度:2%

5.提供標準金屬儀表箱

NK表盤式測力表表盤式測力表價格低廉，但堅固可靠，用于測量壓力和拉力。廣泛用于機械和電子行業。

技術特點
1.可旋轉表盤校零 
2.峰值點自動記錄

3.測量桿行程可達10mm 
4.操作簡單,價格低廉

5.精度:±1%
6.重量輕，僅重700克

7.提供標準儀表箱（備有：掛鉤、測試盤、V型測頭、錐形測頭等）

Star帶TM傳感器數顯扭力計技術參數：

◆　順、逆時針測試

◆　精度：0.5%

◆　分辨率:1/10000FS

◆　雙向峰值保持

◆　當前值和峰值同時顯示

◆　扭矩/時間曲線圖

◆　顯示曲線圖上的特殊點:zui大值、任一時間值、拐點、導數值、*峰值、開始和結束值、平均值等

◆　上一曲線圖的保存

◆　進度條顯示

◆　三個單位：Nm，Kg.cm，cm，mNm

◆　取樣頻率：1000赫茲

◆　可以用腳踏開關

◆　校準功能

◆　5~15分鐘自動關機（可調）

◆　可編程設置功能

◆　雙口RS232輸出：隨意傳輸zui大、zui小或當前值

◆　數字量輸出

◆　曲線圖輸出

◆　每秒50個值的傳輸速度

◆　當前值的設定保護功能

◆　自動確認傳感器

◆　可翻轉顯示功能

◆　連續工作8小時不用充電

◆　快速充電

◆　可逆測量

◆　背景光顯示

◆　可充電電池

◆　低電提示

◆　配置記憶功能

◆　金屬外殼并且內部有彈性保護膜

◆　背后有用于固定在支架上的螺孔

◆　校準證書

◆　裝有適配器和附件的便攜工具箱

6CNPK張力計名稱

規格

包裝

3CNP K張力計

測量范圍：0.3至3 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

6CNP K張力計

測量范圍：0.6至6 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

15CNP KM張力計

測量范圍：2至15 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

30CNP KM張力計

測量范圍：3至30 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

50CNP KM張力計

測量范圍：5至50 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

100CNP KM張力計

測量范圍：10至100 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

150CNP KM張力計

測量范圍：10至150 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

250CNP KM張力計

測量范圍：25至250 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

500CNP KM張力計

測量范圍：50至500 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

1000CNP KM張力計

測量范圍：100至1000 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

2000CNP KM張力計

測量范圍：200至2000 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

1000CNPKM張力計

6CNPK張力計

100CNPKM張力計

500CNPKM張力計

50CNPKM張力計名稱

規格

包裝

3CNP K張力計

測量范圍：0.3至3 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

6CNP K張力計

測量范圍：0.6至6 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

15CNP KM張力計

測量范圍：2至15 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

30CNP KM張力計

測量范圍：3至30 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

50CNP KM張力計

測量范圍：5至50 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

100CNP KM張力計

測量范圍：10至100 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

150CNP KM張力計

測量范圍：10至150 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

250CNP KM張力計

測量范圍：25至250 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

500CNP KM張力計

測量范圍：50至500 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

1000CNP KM張力計

測量范圍：100至1000 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

2000CNP KM張力計

測量范圍：200至2000 精密度：+/-0.01×(刻度盤zui大讀數＋實際測得之讀數)

1支

U型測力計30354-0058

Flat or recessed bottom gage

Maximum pointer

Shockless dial indicator

Dial orientation
0°, 900°, 1800°, 2700°

U型測力計30354-0066 Flat or recessed bottom gage

Maximum pointer

Shockless dial indicator

Dial orientation
0°, 900°, 1800°, 2700°

XC機械測力計30386-0035 Maximum Pointer Option

Shockless Dial Indicator

30799-0010XPP機械測力計XPP - Tension/Compression - Mechanical Force Gage

Maximum Pointer (Not Available)

Shockless Dial Indicator

30800-0017XPP機械測力計

RON2501-80T吊秤

RON2501-125T吊秤

BlueForce沖擊測力計lueForce: one of a kind, with dual Bluetooth and USB interface